Locomotive Spare Parts Long Service Life White LED Auxiliary Light
Product overview
It is widely mounted at front lower part of locomotive or any position requires auxiliary lighting, used as auxiliary lighting for locomotive running and proximity lighting for operation, convenient for safe operation.
Product specification
| S.No. | Item | Value |
| 1 | Product Name | LED auxiliary light (white) |
| 2 | Model | GDB-225W-24S |
| 3 | Ambient temperature | ﹣40℃-﹢70℃ |
| 4 | Illuminant | Big power, high brightness, long-life LED |
| 5 | Color & material | Commonly grey white, Q235 thickened metal cold plate |
| 6 | Rated voltage | DC24V, allowable voltage range DC18-DC32V, the variation shall not exceed ±20% of rating. |
| 7 | Rated power | 40W/20W, strong light 40W, weak light 20W, select single light if use as auxiliary light. |
| 8 | Light cover type | Figured flat high temperature resistance glass, outdoor weather resistance |
| 9 | Lens effects flare | Flood stripe type |
| 10 | Irradiating angle | 60° |
| 11 | Adjustable angle | No, fix type |
| 12 | Ballast module | Power IC control module is built in LED light, intelligent temperature control adjusting, dynamic protection at any time. |
| 13 | Protection | Over current, over voltage, instantaneous short circuit, open circuit, reverse connection protection. |
| 14 | Cable | High temperature resistance cable, mesh weaving, good EMC shielding property, suitable for long time operation. |
| 15 | Lumens | ≥4500Lm |
| 16 | Protection level | IP65, with rubber damping seal, suitable for indoor, half outdoor, and outdoor using |
| 17 | Life | Not less than 20000h, warranty 2 years |
| 18 | Irradiating range | Around 100m |
| 19 | Color temperature | 6000-6500K, white |
| 20 | Mounting bolt | M6×40mm half-round head cross bolt, or decide according to the thickness of steel plate |
| 21 | Dimension | Diameter × thickness = Φ225×110mm |
| 22 | Mounting hole size | Reserved hole size Φ170mm, and reserve three M6 screw holes equally distributed on a Φ200±0.25mm circle for mounting |
| 23 | Fixing way | When mounting, (make sure there have welded or riveted stud on the mounting plate), align the mounting holes of light to the reserved holes on locomotive, fix and tighten with M6 bolts. |
| 24 | Weight | 2.1Kg |
Product advantages
·Use reliable long-life LED illuminant, convenient for further repair and replace.
·Figured flood type lens, suitable for larger irradiating range requirement.
·Thickened metal cold plate housing, no corrosion for long-term outdoor using, protection level is more than IP65, more suitable for outdoor using.
·Intelligent constant current power unit, ensure luminance will not have flickering change when the working voltage is floating.
·Flat type lens is optional if need long distance irradiation; Input voltage is customizable.
Notes for light use
·When mounting, please tighten equally after all the bolts are aligned to the mounting holes well.
·Clean up the surface of light glass cover periodically, avoid the effect to the luminance.
·After long-time use, if the light becomes weaker after 3~5 years, please replace new light in time.
Product drawing
Product application
Product Tags:
|
|
Auxiliary LED Locomotive Headlights Images
|
